Hi all,
My first post to this forum!
I'm am seeking some guidance from those in the know....
I have a rifle chambered in 6.5 Arch improved, that I would like to get a full length sizing die for.
The rifle is for 500m fly and I (perhaps foolishly) want to persist with it.
Obviously this is not an 'off the shelf' prospect.
I will likely need to get a reamer made (unless someone knows different).
Would anyone know if there is a toolmaker that might be able to create the reamer needed?
All assistance in this journey would be appreciated!
Try Whidden Gunworks
Great,
Thanks for that tip.
But it can take a while for custom reamers.
https://www.jgsprecision.com/
Rob.
BB Administrator
The late Alan Peake had a rifle chambered in 6.5 Arch - not sure if it was an "improved". That was chambered in Australia by I think a chap in Canberra who does quite a bit of work. His name escapes me, but I am sure someone on this forum will know. You might also want to ask Robert Tobler if he has such a reamer.
Thanks all,
Looks like Whiddens are not taking new orders...per notice on their website.
Robert has the chamber Reamer, but can't do a full length sizing die.
You might be able to send fired cases to RCBS or one of the other die manufactures to make a custom F/L die. Check their web sites.
Gary