| Attachment | Size |
|---|---|
 20240711_171605.jpg | 3.17 MB |
Hi there folks
I'm hoping someone out there can help me out.
Longish story but really the important bit is me dropping the bolt and the firing pin braking at the cocking piece. Hopefully someone knows where I can get a firing pin or even a bolt for this no longer made rimfire. Or alternatively does anyone have another idea to get it shooting again?
Really appreciate any help with this
Thanks.
It occurred to me shortly after posting that all I needed was the cocking piece and could either make one or have one made. Unless someone has another solution in a week or so.
Contact stiller on rimfire accuracy. He made them and might still have spares.
Getting one out of the states might be another issue.
Kim
Yes you would think they would have one or two stashed but I tried stiller and they were no help and they have well and truely left the copperhead behind and suggested looking here for one. I'll be able to get one made either by Greg Plim or John Perrot. All good I'll get it sorted out.
From just looking at the photo you provided, I would think a competent tool maker or good gunsmith could put that back together. It is probably worth talking to one of these blokes as it could solve your problem
Team KAOS
Calm and Relentless
I would be surprised if a remington one wouldn't be close. I think if I look hard enough I'll find one to fit with a little work.
I'd like to thank Peter Fleming for finding what I need to get the copperhead back together and Greg Plim for fitting it. These remington clones can certainly make things easier.